Owner`s manual

ENGLISH

All connections should be made with the audio equipment

switched off.

There are 2 linked pairs of terminals on the back of the speaker.

For conventional connection, the terminal links should remain in

place (as delivered) and just one pair of terminals connected to

the amplier. For bi-wire connection the terminal links should be

removed and each pair of terminals connected to the amplier

independently. Bi-wiring can improve the resolution of low-level

detail.

Ensure that the positive terminals on the speaker (marked + and

coloured red) are connected to the positive output terminal on the

amplier and the negative terminals on the speaker (marked – and

coloured black) are connected to the negative output terminal on

the amplier. Incorrect connection can result in poor imaging and

loss of bass.

Ask your dealer for advice when selecting speaker cable. Keep

its total impedance below the maximum recommended in the

speaker specication and use a low inductance cable to avoid

attenuation of high frequencies.

3. Connections

HTM61 S2

HTM62 S2