Instruction manual

AC Adapter

Nasal piece

Mouth piece

4. Use Instructions

1. Take the unit and the AC adapter out of the box.

2. Remove the clear housing and pour the medication into the medication

container (8 ml max.).

3. Put the clear housing and insert the device to be used into it (adult mask,

pediatric mask, and nasal or mouth piece).

CAUTION: carefully check the membrane placed at the bottom of the

medication cup before each use. If it is pierced or broken do not use the

nebulizer and contact the B.Well Customer Service Center.

4. Plug the unit and the power connector to the unit.

5. Press ON switch, the green light will turn on and the unit will start to operate.

Adjust the air regulator to the desired intensity.

6. The unit will automatically turn off at 3 minutes. If you wish to continue

nebulizing, check if the medication amount in the pool is the suitable one. Add

more if necessary. Then press the ON/OFF switch twice and the unit will start to

operate again.

7. Once use is over, unplug the equipment and disconnect the AC adapter.

Remove the clear housing and dry the left medication using a clean cloth.

Car lighter adapter

(optional)