Owner`s manual

1. Design features
Circuit Configuration
Frequency Response
Signal to Noise Ratio
Input Sensitivity
Input Level Selector
Crossover
Low Pass Crossover Range
Subsonic Crossover Range
Bass Boost @ 45Hz
Phase : 0 ~ 180
Remote Control
Damping Factor
Power Terminal gauge
Fuse Rating
M1
HI-EF Class D Mono
: 15Hz ~ 250Hz
: 100dB
: 6V ~ 0.2V
: -
: 24dB / Oct
: 35Hz ~ 250Hz
: 10Hz ~ 50Hz
: 0 ~ 9dB
:
: 300<
: 0 ga x 3
: 850A
All features are subject to change in the continuing effort to improve the products without notice.
Power @ 4 Power @ 2 Power @ 1 (12V < 1% THD)
M1
1900 W x 1 3500 W x 1 6400 W x 1
Specifications (detailed)
2) The amplifier has a 4 stage advanced protection circuit;
-Thermal protection, Voltage sensors, DC offset & short circuitry via speaker outputs.
The
M1 utulizes a double sided SMD pcb & high current mosfet switching devices in both
the in- and output stage.
A
4) wired remote level control is included with the amplifier.
- This unit will enable remote gain adjustment.
- For more advanced features like selectable bass frequency, boost level & gain,
the
Better Bass Remote (optional) can be used.
5) The crossovers of the
M1 are variable 24 dB/octave filters for both low pass & subsonic.
Specifications
Continious output power rating (RMS)
The M1 operates stable @ impedances of minimum 1 mono.
- Running the
M1 at these impedances sets requirements to ventilation & the battery system.
1)
3)
3
2800 W x 1 5200 W x 1 9500 W x 1
Power @ 4
Power @ 2 Power @ 1 (16V < 1% THD)
Power @ 4 Power @ 2 Power @ 1 (14,4V < 1% THD)
3300 W x 1 6100 W x 1 11000 W x 1