Owner`s manual

1. Design features
Circuit Configuration
Frequency Response
Signal to Noise Ratio
Input Sensitivity
Input Level Selector
Crossover
Low Pass Crossover Range
Subsonic Crossover Range
Bass Boost
Bass Boost frequency
Phase : 0 ~ 180
Remote Control w/clip indicator
Damping Factor
Power Terminal gauge
Fuse Rating
M1u
HI-EF Class D Mono
: 15 Hz ~ 250 Hz
: 100dB
: 6V ~ 0.2V
: -
: 24dB / Oct
: 35 Hz ~ 250 Hz
: 10 Hz ~ 50 Hz
: 0 ~ 9dB
:
: 300>
: 0 ga x 3
: 850A
All features are subject to change in the continuing effort to improve the products without notice.
Power @ 4 Power @ 2 Power @ 1 (12V < 1% THD)
M1u
2000 W x 1 3700 W x 1 6500 W x 1
Specifications (detailed)
2)
The M1u operates stable @ impedances of minimum 1 mono.
- Running the amplifer at that impedance sets requirements to both ventilation & the battery system.
Operation below minium impedance will void the limited warranty*
The amplifier has a 4 stage advanced protection circuit;
-Thermal protection, Voltage sensors, DC offset & short circuitry via speaker outputs.
The
M1u utilizes a double sided SMD pcb & high current mosfet switching devices in both
the in- and output stage.
A wired remote level control with clip indicator is included with the amplifier.
- This unit will enable remote gain adjustment.
The crossovers of the
M1u are variable 24 dB/octave filters for both low pass & subsonic.
*LIMITED WARRANTY INFORMATION
B2 audio offers a limited warranty under the following terms:
The product is to be free of defects in material & workmanship under normal use for a period of 1 year from the date of the original purchase, when installed by
an authorized dealer. Items not installed by authorized dealers will be warrantied for 30 days from the original purchase. Original sales receips must be accompanied
with all returns.The warranty applies to the original purchaser of the product & it being sold by authorized B2 audio dealers.
The warranty does not cover: 1. Damage caused by accident, abuse, misuse, improper operation, water / solvents & shipping.
2. Product modification, neglect, failure to follow installation instructions & misrepresentation by the seller.
3. Products used for competition purposes or are of such a charachter 4. Any product that has been opened.
5. Products that has had the serial number defaced, altered or removed.
6. The cost of shipping the product back for repair to an authorized repair centre & cost of return of non-defective items.
Specifications
Continious output power rating (RMS)
1)
3)
3
2800 W x 1 5300 W x 1 9900 W x 1
Power @ 4
Power @ 2 Power @ 1 (14,4V < 1% THD)
: 45 Hz
Power @ 4 Power @ 2 Power @ 1 (16V < 1% THD)
3300 W x 1 6300 W x 1 11500 W x 1
4)
5)