Owner`s manual

HeadUnit

Mono MASTER AMPLIFIER

4-5. Mono DAISY CHAIN CONNECTION

Daisy chain connection allows linking of 2 mono amplifiers to work as 1.

Step 1. Connect the master Mono amplifier to the head-unit and set its output master

Step 2. Connect the master and slave Mono amplifier in daisy chain Rca jack as shown

in the diagram.

Step 4. Connect speaker cable ( + ) on master Mono amplifier to subwoofer ( + )

Step 5. Connect speaker cable ( + ) on slave Mono amplifier to subwoofer ( )

Step 6. Connect speaker cable ( ) on master Mono amplifier to speaker cable ( ) on slave amplifier

Mono Minimum daisy chain connection impedance is 2 ohm

Do not use daisy chain connection in 1 ohm

Mono SLAVE AMPLIFIER

Please read the following connection diagram cautiously to ensure the correct connection.

and input slave switch to the output master position.

Step 3. Set the slave Mono amplifier output master & input slave switch to the slave input position.