Owner`s manual

Mono

Head unit

Mono Master amplifier

3.4 Daisy chain connection

Daisy chain connection allows linking of 2 Mono amplifiers to work as 1 single amplifier.

Please read the following connection diagram cautiosly to ensure the correct connection.

Step 1. Connect the master

Mono amplifier to the head unit and set its output master

and input slave switch to output master position.

Step 2 . Connect the master and slave

Mono amplifier in daisy chain Rca jack as shown

in the diagram.

Step 3 . Set slave

Mono amplifier output master & input slave switch to slave input position.

Step 4 . Connect speaker cable (+) on master

Mono amplifier to subwoofer (+)

Step 5. Connect speaker cable (+) on slave

Mono amplifier to subwoofer (-)

Step 6 . Connect speaker cable (-) on master

Mono amplifier to speaker cable (-) on slave amplifier

Mono Slave amplifier

CAUTION

The minimum impedance as 1 unit is 1 .

In a daisy chain configuration the minimum

impedance is 2 .