Owner`s manual

1. Design features
Circuit Configuration
Frequency Response
Signal to Noise Ratio
Input Sensitivity
Input Level Selector
Crossover
Low Pass Crossover Range
Subsonic Crossover Range
Bass Boost
Bass Boost frequency
Phase : 0 ~ 180
Remote Control w/clip indicator
Damping Factor
Power Terminal gauge
Fuse Rating
Zero.5
HI-EF Class D Mono
: 15Hz ~ 250Hz
: 100dB
: 6V ~ 0.2V
: -
: 24dB / Oct
: 35Hz ~ 250Hz
: 10Hz ~ 50Hz
: 0 ~ 9dB
:
: 300<
: 0 ga x 2
: 200A
All features are subject to change in the continuing effort to improve the products without notice.
Power @ 4 (12V & 14.4V < 1% THD) Power @ 4 linked (12V & 14.4V < 1% THD)
M1S
500 W x 1 1000 W x 1
Specifications (detailed)
2) The amplifier has a 4 stage advanced protection circuit;
-Thermal protection, Voltage sensors, DC offset & short circuitry via speaker outputs.
The
Zero.5 utilizes a double sided SMD pcb & high current mosfet switching devices in both
the in- and output stage.
A
4) wired remote level control with clip indicator is included with the amplifier.
- This unit will enable remote gain adjustment.
- For more advanced features like selectable bass frequency, boost level & gain,
the
Better Bass Remote (optional) can be used.
5) The crossovers of the
Zero.5 are variable 24 dB/octave filters for both low pass & subsonic.
Specifications
Continious output power rating (RMS)
The Zero.5 operates stable @ impedances of minimum 1 mono.
- Running the amplifer at that impedance sets requirements to both ventilation & the battery system.
Operation below minium impedance will void the warranty.
1)
3)
3
1000 W x 1 2000 W x 1
Power @ 2 Power @ 2 linked
: 30 ~ 80Hz
Power @ 1
2000 W x 1