Owner`s manual

Mono
8
3.31 Speaker wiring diagram
PROTECT
POWER
REMOTE
BOOST
FREQ.
LPF PHASESUBSONICGAIN
BASS
SLAVE
MASTER
OUTPUT
SLAVE
INPUT
INPUT
CH2
CH1
0.2V
6V
10Hz 50Hz 0dB
9dB
30Hz 90Hz 35Hz 250Hz 0 180
MASTER
SPEAKER
PROTECT
POWER
REMOTE
BOOST
FREQ.
LPF PHASESUBSONICGAIN
BASS
SLAVE
MASTER
OUTPUT
SLAVE
INPUT
INPUT
CH2
CH1
0.2V
6V
10Hz 50Hz 0dB
9dB
30Hz 90Hz 35Hz 250Hz 0 180
MASTER
SPEAKER
LINKED AMPLIFIER SPEAKER CONNECTION
Min. 8 AWG
speaker cable
In a linked amplier conguration, the MASTER amplier will control the settings of the SLAVE amplier.
The positive terminal of the subwoofer's voice coil must be connected to the positive terminal of the
MASTER Amplier and the negative terminal of the subwoofer's voice coil must be connected to
positive terminal of the SLAVE Amplier. Since the linked amplier conguration will increase output
levels by 2 at the same impedance as 1 single unit , make sure that your speakers are wired correctly!
MASTER UNIT
SLAVE UNIT
Speaker Impedance 2~8 ohms
CAUTION
The minimum impedance as 1 unit is 1 .
In a linked configuration the minimum
impedance is 2 .