Owner`s manual
Wiring layout
+12V, GND, REM connection, Speaker connection
7
Mono
BATTERY
Head unit
GROUND*
* Keep ground as short as possible, no longer
than 20” (50 cm).
150A (External fuse)
We recommend to use minumum12 Ga speaker cables to acquire the intended performance.
Run the speaker cables from your speakers to the amplier’s mounting location.
Ensure these are ran separately and away from high current cables and if possible the RCA cables as well.
In all cases where cables are penetrating the vechile’s chassis use grommets to protect the cable.
Connect the speaker wires according to the terminals on the speaker(s). Strip 3/8’’ / 1 cm of insulation of the end of
each cable
and twist the cable strands together tightly. Make sure there are no stray strands that could touch other cables or
terminals as it can cause a short circut.
Crimp spade plugs over the end of the cable or tin the ends with solder to provide a solid terminal.