User manual

Congratulations
to the purchase of your new Grip-Lock
®
Thank you very much for deciding to use our product.
Please read these instructions before using your Grip-Lock
®
.
Contents
• One Grip-Lock
®
• Two keys
• Three adapter pads (small / medium / large)
Instructions
Select two adapter pads and push them into the Grip-Lock
®
.
They should grip the throttle tightly.
If you like, you can glue these in place.
Squeeze the sides of the slider together and move it in
position – by positioning the slider, you can choose having
the brake open, partly engaged or fully locked.
Place the Grip-Lock
®
over your throttle grip, close it and push
in the lock – no key is required to engage the Grip-Lock
®
.
To open, simply insert the key and twist it clockwise 1/4 of a
turn. The lock cylinder pops out and you can now
remove the Grip-Lock
®
.