TABLE OF CONTENTS Safety Information FCC Declaimers ....................................................................................................................................... 4 WEEE ....................................................................................................................................................... 5 Precautions Notice ...............................................................................................................................................
TABLE OF CONTENTS Chapter 5: Adjusting the Settings 5.1 Brightness Setting .............................................................................................................................. 28 5.2 Colour Setting..................................................................................................................................... 30 5.3 Image Setting (PC Source only) ......................................................................................................... 31 5.
SAFETY INFORMATION This FCC Class-B compliant digital device complies with the Interference-Causing Equipment Regulations of Canada. FCC Declaimers This device complies with Section 15 of the FCC listing. The operation procedures must meet the following conditions: (1) the device must not cause any damaging interference; and (2) this device must accept any received interference, including any unpredictable interference that may possibly occur.
SAFETY INFORMATION WEEE Information for users applicable in European Union countries. The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic equipment recycling.
PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice • Read this User Manual carefully before using the LCD display and keep it for future reference. • The product specifications and other information provided in this User Manual are for reference only.
PRECAUTIONS Cautions When Using Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD Warning: display and be easily accessible. Unplug the power cord If an extension cord is used with the LCD display, from the power outlet and ensure that the total current consumption plugged into the power outlet does not exceed the ampere rating. refer to qualified service personnel under the following conditions: Do not allow anything to rest on the power cord.
PRECAUTIONS Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time. When static images are displayed for long periods of time, the image may cause an imprint on the LCD display. This is called image retention or burn-in.
CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. LCD Display User Manual Power adapter Note: Must use only the supplied power adapter: ♦ Lite-on Technology Corporation Model no. :PA-1051-0 Rating: 12V/4.16A Power cord VGA cable Audio cable Note: ♦ The pictures are for reference only. Actual items may vary upon shipment.
PRODUCT DESCRIPTION 1.2 Wall Mounting Installation Preparation Note: 1.2.1 To protect the glass panel, place a Wall Mounting towel or soft cloth before laying the 1 Remove the base stand. LCD display down. See procedures below. 2 Wall mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of the LCD display. Warning: Ceiling mount or mount 100mm on any other horizontal surface overhead are not advisable.
PRODUCT DESCRIPTION 1.3 LCD Display Overview 1.3.1 Front View and Keypad Buttons 1 1 2 FREEZE/ AUTO ADJ. VOL DOWN VOL UP PIP SELECT SWAP/ ROTATE MENU INPUT SELECT 2 3 4 5 6 7 8 Display screen The LCD display screen is protected by NeoVTM Optical Glass. 5 UP AUTO 6 DOWN • When PIP is on, press to SWAP the PIP main and sub picture. • When PIP is off, press to rotate the image 180°. • During OSD menu selection, press to move up a menu or submenu.
PRODUCT DESCRIPTION 1.3.2 Rear View S-VIDEO 6 CVBS-1 CVBS-2 7 AUDIO L 8 IN R DC IN 1 1 HDMI DVI VGA AUDIO IN 2 3 4 5 DC power input 5 Use to connect the power cord. Audio port Use to connect an audio cable for the PC’s audio input. 2 3 4 HDMI connector 6 S-Video connector Use to connect an input device using Use to connect AV cables for the HDMI cable for digital input signal. S-Video signal.
CHAPTER 2: MAKING CONNECTIONS 2.1 Connecting the Power 1 Connect the power cord to the power adapter. 2 Connect the power adapter to the DC power input at the rear of the LCD display. 3 Connect the power cord plug to a power outlet or a power supply. DC IN Caution: ♦ Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause electric shock or personal injury.
MAKING CONNECTIONS 2.2 Connecting Input Source Signals 2.2.1 Connecting a Computer Using VGA Cables Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub connector of the computer. VGA Using DVI Cables Connect one end of a DVI cable to the DVI connector of the LCD display and the other end to the DVI connector of the computer.
MAKING CONNECTIONS Connecting an Audio Device Connect one end of an audio cable to the audio port at the rear of the LCD display and the other end to the audio out port of the computer. AUDIO IN 2.2.2 Connecting a Camera or Video Device Using CVBS Cables Connect one end of a CVBS cable CVBS-1 to the COMPOSITE connectors of the LCD display and the other end to CVBS-2 the COMPOSITE connectors of your AUDIO device.
MAKING CONNECTIONS Using S-Video Cables Connect one end of an S-Video S-VIDEO cable to the S-VIDEO connector of the LCD display and the other end to the S-VIDEO connector of your device. For audio input, connect an RCA cable to the audio in connector of the LCD display and the audio out connector of your device. Using HDMI Cables Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of your device.
CHAPTER 3: USING THE LCD DISPLAY 3.1 Turning on the Power Note: POWER button ♦ LED indicator 1 2 Plug the power cord to a power outlet or power supply. Touch the POWER button to turn the LCD display on. The LCD display still consumes power as long as the power cord is connected to the power outlet. Disconnect the power cord to completely cut off power. The LED indicator turns GREEN. When the LCD display is turned on, touch the POWER button to turn off the LCD display. The LED indicator turns off. 3.
USING THE LCD DISPLAY 3.3 Adjusting the Volume VOLUME buttons 1 Touch the button to call out the volume bar. 2 Touch the button to increase volume or the and To mute the audio, set the volume to 0. Or, press the To unmute the audio, press the and button to decrease volume. buttons at the same time. buttons. Alternatively, press to call out the volume bar and adjust the volume. 3.
USING THE LCD DISPLAY 3.5 Setting the Aspect Ratio 3.5.1 Aspect Ratio Options Touch the button repeatedly to scroll among the aspect ratio options. Options are as follows: • Underscan: The picture is displayed in full screen. • Overscan: The picture is displayed in full screen while retaining the original aspect ratio. This results in a zoomed image and some part of the picture may appear cut-off. • Normal: The picture is displayed based on the current monitor resolution.
USING THE LCD DISPLAY 3.6 Using Picture-in-Picture (PIP) The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display. 3.6.1 PIP Options Touch the button repeatedly to enable and scroll among the PIP options. Options are as follows: • PIP On: The sub source signal is displayed within the main source signal. • PAP (Picture-and-Picture): The main source and the sub source signals are displayed side by side with equal display size.
USING THE LCD DISPLAY 3.6.2 PIP Swap The main and the sub source signals set in PIP Setting can be easily swapped using the keypad. Note: ♦ PIP Swap can only be executed if PIP is enabled, see page 37. Main source Sub source button to swap the main source and the sub source Touch the signals. See illustration below. Main source Sub source 3.7 Using ROTATE Function The ROTATE function allows you to rotate the screen image at 180°.
USING THE LCD DISPLAY 3.8 Using Auto Adjustment Function Auto Adjustment function automatically tunes the LCD display to its Note: optimal setting, including horizontal position, vertical position, clock, ♦ and phase. Touch the Auto Adjustment function is available only during VGA input signals. button to perform auto adjustment. ♦ The message auto adjusting is displayed on the screen.
CHAPTER 4: ON SCREEN DISPLAY MENU 4.1 Using the OSD Menu Operation 1 Display the main menu screen. N T S C Touch .
ON SCREEN DISPLAY MENU Operation 3 Select the submenu item. Touch the or buttons. or buttons. B R I G H T N E S S 5 0 C O N T R A S T 5 0 B A C K L I G H T 5 0 The highlighted item with an orange arrow indicates the active submenu. 4 Adjust the settings. Touch the 5 Exit the submenu. Touch or to return to the previous menu. 6 Close the OSD window. Touch or again. When settings are modified, all changes are saved when the user does the following: • Proceeds to the another menu.
ON SCREEN DISPLAY MENU 4.2 OSD Menu Tree N T S C 6 0 H z 1 B R I G H T N E S S 2 C O L O U R 3 I M A G E 4 A S P E C T 5 P I P S E T T I N G S E T T I N G R AT I O S E T T I N G A N T I - B U R N - I N O S D S E T T I N G A U D I O S E T T I N G 7 O T H E R S E T T I N G 8 A U T O B R I G H T N E S S I N P U T S E L E C T 9 10 L A N G U A G E 11 I N F O R M AT I O N 12 Main Menu 1. Brightness 6 Submenu • Brightness Remarks See page 28. • Contrast • Backlight 2.
ON SCREEN DISPLAY MENU Main Menu Image Setting Submenu During Video input signal: Remarks See page 32. • Sharpness • Saturation • Tint • 3D Comb Filter • Noise Reduction • 3D De-interlace • Motion • Video Mode • H. Position • V. Position 4. Aspect Ratio • Aspect Ratio See page 35. • H. Zoom • V. Zoom 5. PIP Setting See page 37. • PIP • Main Source • Sub Source • Sub Picture Size • Sub Pic. Pos. • Swap 6. OSD Setting • Transparency See page 39. • H. Position • V. Position • OSD Timer 7.
ON SCREEN DISPLAY MENU Main Menu 10. Input Select Submenu See page 44. • VGA • DVI • HDMI • CVBS1 • CVBS2 • S-Video 11. Language Select the OSD language: EN / FR / DE / ES / IT / PY / RO / PL / CS / NL / ㇵЁ / 㐕Ё 12. Information Remarks Displays settings information such as Input, Resolution, Horizontal and Vertical Frequency, Time mode, and Firmware version.
CHAPTER 5: ADJUSTING THE LCD DISPLAY 5.1 Brightness Setting N T S C 6 0 H z 1. Touch B R I G H T N E S S 5 0 B R I G H T N E S S 2. Select BRIGHTNESS menu, then C O N T R A S T C O L O U R 5 0 S E T T I N G touch the B A C K L I G H T I M A G E S E T T I N G to call out the OSD window. 3. Touch the A S P E C T P I P button. 5 0 R AT I O or buttons to select an option.
ADJUSTING THE LCD DISPLAY Original Setting High Setting Brightness Contrast Backlight 29 Low Setting
ADJUSTING THE LCD DISPLAY 5.2 Colour Setting N T S C 6 0 H z C O L O U R 1. Touch T E M P. 6 5 0 0 K B R I G H T N E S S 2. Select COLOUR SETTING menu, then 5 4 0 0 K C O L O U R 9 3 0 0 K S E T T I N G touch the s R G B I M A G E A U T O S E T T I N G P I P R AT I O S E T T I N G button. C O L O U R 3. Touch the U S E R A S P E C T to call out the OSD window. R 1 2 8 G 1 2 7 B 1 0 6 or buttons to select an option.
ADJUSTING THE LCD DISPLAY 5.3 Image Setting (PC Source only) Note: Some submenu items are not available in DVI input source signal. 1 0 2 4 x 7 6 8 6 0 H z 1. Touch S H A R P N E S S 5 0 B R I G H T N E S S 2. Select IMAGE SETTING menu, then P H A S E C O L O U R 5 0 S E T T I N G touch the C L O C K I M A G E S E T T I N G R AT I O 3. Touch the 5 0 S E T T I N G A N T I - B U R N - I N or buttons to select an option. V. P O S I T I O N P I P button. 5 0 H .
ADJUSTING THE LCD DISPLAY 5.4 Image Setting (Video signals) N T S C 6 0 H z 1. Touch S H A R P N E S S S CA O TN UT R RA A TS I TO N C O L O U R 2. Select IMAGE SETTING menu, then 5 0 S E T T I N G touch the T I N T I M A G E S E T T I N G 5 0 3 D A S P E C T P I P R AT I O C O M B F I LT E R O N O F F N O I S E O F F S E T T I N G M I D 3 D M O T I O N O N O F F S E T T I N G O T H E R S E T T I N G button. or buttons to select an option. H I G H O S D S E T T I N G 3.
ADJUSTING THE LCD DISPLAY Item Function Operation Adjusts the noise reduction to help Noise Reduction Touch the helps produce clearer and crisper select the value. or buttons to Low High Noise Reduction Off Noise Reduction On Enables the 3D De-interlace feature which prevents blurring and flickering Touch the or buttons to 3D De-interlace Off On Off select the value. of images. 3D De-interlace On Enables the Motion feature which Motion Value Off remove noise from images. This images.
ADJUSTING THE LCD DISPLAY Item Function Operation Range / Value Standard Video Mode Depending on the content of your PC, select the video mode for better display. Touch the or buttons to Text Movie select the value. Graphic H. Position Moves the screen image to the left (Horizontal or right. Position) Touch the or adjust the value. V. Position Moves the screen image up or down.
ADJUSTING THE LCD DISPLAY 5.5 Aspect Ratio Setting Note: Overscan is available only in VGA and HDMI input source signals. N T S C 6 0 H z C O L O U R I M A G E 1. Touch A S P E C T R AT I O U N D E R S C A N B R I G H T N E S S O V E R S C A N N A T I V E H . S E T T I N G 2. Select ASPECT RATIO menu, then touch N O R M A L S E T T I N G to call out the OSD window. button. the Z O O M 5 0 A S P E C T V. R AT I O 3. Touch the Z O O M 5 0 P I P or buttons to select an option.
ADJUSTING THE LCD DISPLAY Item Function Operation Range / Value H. Zoom Adjusts the horizontal zoom. (Horizontal Zoom) Touch the or adjust the value. V. Zoom Adjusts the vertical zoom.
ADJUSTING THE LCD DISPLAY 5.6 PIP Setting N T S C 6 0 H z 1. Touch B R I G H T N E S S P I P O F F P I P C O L O U R M A I N S O U R C E V G A D V I H D M I S E T T I N G 2. Select PIP SETTING menu, then touch S E T T I N G A S P E C T S - V I D E O 3. Touch the S U B S O U R C E V G A D V I H D M I R AT I O C V B S 1 C V B S 2 P I P S E T T I N G S U B 1 S E T T I N G O T H E R S E T T I N G A U T O I N P U T buttons to select an P I C . S I Z E 2 3 S U B P I C . P O S .
ADJUSTING THE LCD DISPLAY Note: Any input signal may be set as the main or the sub source signal. However, some input signals are not supported to be paired together as the main and the sub source signals. Refer to the following table for compatibility options. Table 5.
ADJUSTING THE LCD DISPLAY 5.7 OSD Setting N T S C 6 0 H z 1. Touch T R A N S PA R E N C Y 2. Select OSD SETTING menu, then touch H . P O S I T I O N C O L O U R 5 0 S E T T I N G S E T T I N G 5 0 O S D A S P E C T P I P button. the V. P O S I T I O N I M A G E to call out the OSD window. 5 0 B R I G H T N E S S T I M E R R AT I O 3. Touch the 1 0 0 or buttons to select an option.
ADJUSTING THE LCD DISPLAY 5.8 Audio Setting N T S C 6 0 H z 1. Touch A U D I O O N B R I G H T N E S S C O L O U R I M A G E 2. Select AUDIO SETTING menu, then V O L U M E 5 0 touch the button. S E T T I N G A S P E C T P I P S E T T I N G to call out the OSD window. O F F 3. Touch the R AT I O or buttons to select an option.
ADJUSTING THE LCD DISPLAY 5.9 Other Setting N T S C 6 0 H z P O W E R O N B R I G H T N E S S S O U R C E C O L O U R M A N U A L S E T T I N G A S P E C T P I P O N O F F D C R R AT I O O N or 3. Touch the O F F buttons to select an option. R E C A L L S E T T I N G button. touch the D C C / C I I M A G E to call out the OSD window. 2. Select OTHER SETTING menu, then D E T E C T A U T O S E T T I N G 1.
ADJUSTING THE LCD DISPLAY Item Function Operation Activates the DDC/CI protocol to allow users DDC/CI to configure the monitor by a software using two wires on the VGA or DVI cables. Touch the or buttons to Range / Value On Off select the value. Activates DCR. This feature provides DCR automatic adjustment of picture brightness (Dynamic and contrast at high speed and dynamic Contrast Ratio) contrast range, such as when watching Touch the or buttons to select the value. On Off movies.
ADJUSTING THE LCD DISPLAY 5.10 Auto Brightness 5.10.1 EcoSmart Sensor With the built-in EcoSmart sensor, users can enable the Auto Brightness feature to automatically adjust the LCD screen brightness according to the ambient light. This feature comforts the eyes and helps optimise energy efficiency. N T S C 6 0 H z 1. Touch E N A B L E O N B R I G H T N E S S 2.
ADJUSTING THE LCD DISPLAY 5.11 Input Select N T S C 6 0 H z 1. Touch V G A 2. Select INPUT SELECT menu, then touch D V I C O L O U R P R E S S S E T T I N G the H D M I I M A G E S E T T I N G P I P R AT I O 3. Touch the P R E S S or buttons to select an option. C V B S 2 S E T T I N G P R E S S S - V I D E O A N T I - B U R N - I N O S D button. P R E S S C V B S 1 A S P E C T to call out the OSD window.
CHAPTER 6: APPENDIX 6.1 Warning Messages Warning Messages Cause The resolution or the refresh rate of INPUT SIGNAL OUT OF RANGE Solution • Change the resolution or the the graphics card of the computer refresh rate of the graphics is set too high. card. The LCD display cannot detect the input source signal. • Check if the input source is turned ON. • Check if the signal cable is NO SIGNAL properly connected. • Check if any pin inside the cable connector is twisted or broken.
APPENDIX 6.2 Troubleshooting Problem No picture. • LED indicator is OFF. Possible Cause and Solution • Check if the LCD display is turned ON. • Check if the power cord is properly connected to the LCD display. • Check if the power cord is plugged into the power outlet. • LED indicator is AMBER. • Check if the computer is turned ON. • Check if the computer is in standby mode, move the mouse or press any key to wake up the computer. Image position is incorrect. • Adjust the H. POSITION and V.
APPENDIX Problem Mist formed inside the glass surface. Possible Cause and Solution • This happens due to humid weather conditions. This is a normal occurrence. The mist will disappear after a few days or as soon as the weather stabilizes. Faint shadows from a static image appear on the screen. • Turn off the LCD display for extended periods of time. • Use a screen saver or a black and white image and run it for extended periods of time.
APPENDIX 6.3 Transporting the LCD Display To transport the LCD display for repair or shipment, place the display in its original packaging carton. 1 Put all the accessories in the box (if necessary). Place the two foam cushions on each side of the LCD display for protection. 2 Place the LCD display down in the box. 3 Place the accessories box on the designated area (if necessary). 4 Close and tape the box.
CHAPTER 7: SPECIFICATIONS 7.1 Display Specifications X-22 Panel Panel Size X-24 21.5” 23.6” Max. Resolution Pixel Pitch 0.2482 mm 0.2715 mm Brightness 250cd/m2 300cd/m2 Contrast Ratio 2,000,000:1 (DCR) Viewing Angle (H/V) 170°/160° (Typical) Display Colour 16.
SPECIFICATIONS 7.2 Display Dimensions 7.2.1 X-22 Dimensions 282.4mm 53.5mm 32.6mm 368.5mm 100mm 513.2mm 324.3mm 100mm 75mm 75mm 155mm 7.2.2 227.4mm X-24 Dimensions 282.4mm 53.5mm 32.6mm 396.8mm 100mm 562.4mm 352.6mm 100mm 75mm 75mm 155mm 227.
