User guide

Functionality
The „BABY CONTROL DIGITAL” continuously checks your baby’s breathing and
movements to confirm the absence of a possible danger. The BABY CONTROL triggers an
acoustic and visual alarm if breathing stops for longer than 12 seconds or if the rate of
breathing is bellow 8 breaths per minute. This allows for Apnea (Sudden Infant Death
Syndrome) and other life threatening conditions to be indicated in time to save the child. The
sensor pad, positioned under the bed’s mattress, detects the gentle movements of an infant’s
chest. Signals from the sensor go to the control unit, which confirms regular breathing or
movements. The device has no physical contact with the baby and it also does not generate
any form of energy. So it cannot have any harmful effect to the human body.
IMPORTANT:
Do notice that BABY CONTROL can only alert you when your child is breathing
irregularly or not at all. It cannot make any action itself!
THE DEVICE CAN HELP SAVE LIVES, BUT IT IS NOT A LIFESAVING DEVICE! THE
PRODUCT IS CAREFULLY MANUFACTORED AND TESTED. HOWEVER IT SHOULD
BE TESTED DURING THE OPERATION! IN CASE OF ANY MALFUNCTION, ERROR
PLEASE CONTACT WITH THE DISTRIBUTOR! THE MANUFACTURER PROVIDES
WARRANTY FOR THE PRODUCT ITSELF. THE WARRANTY IS NOT VALID FOR
THE BATTERIES AND THE MANUFACTURER IS NOT RESPONSIBLE IF THE
PRODUCT IS NOT USED ACCORDING TO THIS MANUAL.
DO NOT USE MALFUNCTIONING PRODUCT!
Control and Display
Control Button (1), Digital Display (2), Green led (6) Red led (7) Loudspeaker for the alarm
signal sound (3). Using the Control Button the unit can be switched on-off, clear the alarm
event, set the sensitivity (threshold) level and review the event memory.