Extra Information

UPGRADING YOUR MACHINE’S SOFTWARE

198

UPGRADING YOUR MACHINE’S SOFTWARE

You can use USB media or a computer to download software upgrades (file extension .up1) for your sewing

machine.

•

Upgrade Procedure Using USB Media

While holding the “Presser Foot Lifter” button

pressed, turn on the machine.

→ The following screen appears.

Press .

Insert the USB media into the USB port

connector on the machine, making sure the

media only contains the upgrade file.

Press .

→ The message “Saving the upgrade file. Do not turn

main power to OFF.” will appear.

When the following screen appears,

upgrading is completed.

Remove the USB media, and turn the machine

off, then on again.

Memo

• When the machine’s software is upgraded, saved combinations of character and decorative stitches are erased.

However, saved embroidery patterns are not erased.

• While the software is being upgraded, the buzzer will not sound when a key is pressed.

Note

If an error occurred, an error message appears in red.

At this time, turn the machine off, and then start the

procedure again from step a.

PAGE 1
UPGRADING YOUR MACHINE’S SOFTWARE UPGRADING YOUR MACHINE’S SOFTWARE You can use USB media or a computer to download software upgrades (file extension .up1) for your sewing machine. • Memo • When the machine’s software is upgraded, saved combinations of character and decorative stitches are erased. However, saved embroidery patterns are not erased. • While the software is being upgraded, the buzzer will not sound when a key is pressed. Upgrade Procedure Using USB Media a d Press .
PAGE 2
UPGRADING YOUR MACHINE’S SOFTWARE Upgrade Procedure Using Computer e Press . • a While holding the “Presser Foot Lifter” button pressed, turn on the machine. → The following screen appears. b Press . → The message “Saving the upgrade file. Do not turn main power to OFF.” will appear. f c When the following screen appears, upgrading is completed. Plug the USB cable connectors into the corresponding USB port connectors on the computer and on the machine.