Operation Manual

7. Maintenance Cont.
Replacement of light bulb
Swing the lamp cover towards the left to open.
Remove the light bulb and replace with new
one that is the same type rated 15 watts/120
volts or 15 watts/230 volts.
ATTENTION: To prevent possibly injury,
unplug main power cord prior to replacing light
bulb. Make sure the light bulb is cool to the
touch before removing it from the machine.
Cleaning
Remove the sewing table and open the free
arm door.
Clean the lint from inside free arm door, needle
clamp holder, cloth presser and needle plate
periodically.
Dust or lint may cause needle breakage.
Lubrication
Lubricate with one or two drops of oil when
necessary. See the illustration showing the oil-
ing points in the machine. For recommended
oil for your machine please cont
act your Baby
Lock retailer.
11