Instruction manual

T
H
R
E
A
D
I
N
G
19
Threading Your Evolution
Threading Position for Threading,
Thread Stand and Thread Port Reference Chart
Your Baby Lock Evolution is equipped with an exclusive "Electrionic Extraordin Air Threading System" for fast,
easy threading of the upper, lower, and chain loopers.
One touch of the "Push to Thread" button will automatically thread the loopers. It is no longer necessary to use
tweezers for threading the thread guides. If a looper thread breaks or runs out, just re-thread it. There is no need
to follow a specific threading sequence.
1. Open the front cover.
2. Raise the presser foot to release all threads.
3. Set the threading lever from serging position to threading position (fig.A).
4. Rotate the machine handwheel slowly toward you until the tubes move to connectiong position (fig.B).
Note: The Evolution must be in the locked position when threading the loopers unless otherwise indicated.
A
B
C
The spool pins and threading ports are
color coded for your convenience.
All gold color labels relate to threading
for chain and cover stitches.
All green color labels relate to threading
for overlock stitches.
CHAIN
NEEDLE
1
CHAIN
NEEDLE
2
CHAIN
NEEDLE
3
OVERLOCK
NEEDLE
1
OVERLOCK
NEEDLE
2
UPPER
LOOPER
LOWER
LOOPER
CHAIN
LOOPER
C2
O1
U
C1
C3
O2
L
C