Instruction manual

O
V
E
R
L
O
C
K
S
T
I
T
C
H
E
S
E
X
P
R
E
S
S
38
Blanket Stitch - Decorative Stitch
A
B
C
Set up the machine for 2-thread flatlock - wide but the needle thread-
ing path is different for this technique.
1. Insert a size 90 top stitch needle in left overlock needle position.
2. Engage the threading lever in threading position.
3. Place a heavy decorative thread that will be used in the needle on
"OVERLOCK NEEDLE 1" spool pin and thread the needle thread
through upper looper thread path. (See below illustration.)
4. Engage the threading lever in the serging position, pull the thread
out of the upper looper tube and continue to thread the needle as
illustrated.
5. Thread Maxilock thread in the lower looper.
6. Swing the subsidiary looper into place on the upper looper.
7. Place water-soluble stabilizer on top of the fabric, along the edge.
8. Stitch along the edge of the fabric (fig.A).
9. When finished stitching, pull the water-soluble stabilizer to the right
of the fabric (fig.B). This will pull the stitching to the edge and will
look like a blanket stitch (fig.C).
Follow the suggested settings below.
NEEDLES
O-1
size 90 Top Stitch
Needle
LENGTH
4.0
WIDTH
7.5
STITCH
SELECTOR
A
WAVE
SELECTOR
OVERLOCK
〈 〉