Instruction manual

C
O
M
B
I
N
A
T
I
O
N
S
T
I
T
C
H
E
X
P
R
E
S
S
I
V
E
60
7-Thread Reversed Wave Stitch
7-Thread Reversed Wave Stitch is a combined stitch of 3-Thread Reverse Wave and 4-Thread triple cover
stitch. This stitch looks gorgeous with decorative threads appearing on wave stitch and triple cover stitch in
the back of fabric.
For the 7-Thread Reversed Wave Stitch:
1. Use standard blade cover.
2. Thread upper and lower loopers for the 3-thread reversed wave stitch (page 43).
Note: When threading the lower looper thread for the 7-thread Reversed Wave Stitch, use only the tele-
scopic thread guide directly above the lower looper thread. Do not use the chain looper telescopic thread
guide for the lower looper thread (illustration below).
3. Thread chain looper.
4. Thread C-1, C-2, C-3, and O-2 (right) needle positions.
5. Engage the blade to cut the fabric.
6. Select B on the Stitch Selector.
7. Turn the Wave Selector lever from "OVERLOCK" to "WAVE".
The stitch selection charts in the back of the manual have other combination of stitches such as:
6-Thread Reversed Wave - wide (cover stitch wide with 3-thread reverse wave)
6-Thread Reversed Wave - narrow(cover stitch narrow with 3-thread reverse wave)
5-Thread Reversed Wave - (chain stitch with 3-thread reverse wave)
(For proper settings, see chart on page 88/89.)
All these stitch combinations work in the same manner as the 7-Thread Reversed Wave Stitch. See next
page for pictures of the various stitch combinations.
Note: Due to the change in the lower looper telescopic thread path, always sew the 7-thread Reversed
Wave Stitch at a slow speed to avoid the thread getting tangled while sewing.