Item# 6801 Mercer 3-In-1 Convertible Crib Lit de bébé 3 en 1 Mercer revised 10JUL2020 Assembly Instructions Manuel d’assemblage 1
Thank you for purchasing a Babyletto nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.babyletto.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers.
PARTS • PIÈCES Not to Scale/Pas à l'échelle A. Side panel (2) A. Panneau latéral (2) B. Headboard (2) B. Panneau principal (2) C. Mattress Support IV C. Support du matelas IV I. Drawer center I. Panneau central de tiroir D. Glide support (2) D. Support de glissière (2) J. Right drawer side J. Côté droit de tiroir F. Toddler Bed Conversion Kit F. Conversion de lit pour tout-petit G. Left post (2) G. Montant gauche (2) H. Right post (2) H. Montant droit (2) K. Left drawer side K.
HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) T. 1-1/4” Phillips head screw (12) T. Vis à tête cruciforme de 3,2 cm (1-1/4 po) (12) U.1/2” Phillips head screw (10) U. Vis à tête plate de 1,3 cm (1/2 po) (10) W. 2-1/4 “ Allen head bolt (16) W. Boulon Allen de 5,7 cm (2-1/4 po) (16) X-1. Wood dowel (4) X-1. Goujon de bois (4) Z. Cam lock (3) VV. Lock washer (20) VV. Rondelle de Z. Verrou de came (3) blocage (20) STEPASSEMBLY 1. 1 X8 X-2. Samll Wood dowel (4) X-2.
2 A A DO NOT OVERTIGHTEN. NE PAS TROP SERRER. X4 X-2 T T T T D T T D X-2 T X-2 D ! X6 D 3 U U U P O U P D U U D O DO NOT OVERTIGHTEN. NE PAS TROP SERRER. 4 A A VV W VV W W W W VV VV VV B X4 DO NOT OVERTIGHTEN. NE PAS TROP SERRER.
5 B A A V V V C V C V X4 DO NOT OVERTIGHTEN. NE PAS TROP SERRER. ! 0-1 yrs old 0-1 ans * Make sure the mattress support IV (C) is installed FLAT SIDE UP. * Make sure the mattress support IV (C) is level. 1-2 yrs old 1-2 ans * S’assurer que le support du matelas IV (C) est bien installé LE CÔTÉ PLAT VERS LE HAUT. * S’assurer que le support du matelas IV (C) est de niveau.
6 B W VV W VV X4 W VV VV W VV W B DO NOT OVERTIGHTEN. NE PAS TROP SERRER. 7 K N T I N T J M J DO NOT OVERTIGHTEN. NE PAS TROP SERRER.
Y X3 Z K L * Rotate clockwise to secure * Tourner dans le sens des aiguilles d’une montre pour sécuriser I J 9a J P B L M O K 8
b Make sure that the drawer is placed on the tabs on the glide rails. S’assurer que le tiroir est bien placé sur les onglets des glissières. Screw the 1/2” Phillips head screws (U) in the pre-drilled holes on the drawer side panels . The rails should not align with the front of the drawer. K ! U Do not overtighten the screws. Visser les vis à tête plate de 1,3 cm (U) dans les avant-trous des côtés du tiroir. Les glissières ne doivent pas être alignées sur l’avant du tiroir. Ne pas trop serrer les vis.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). Please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase, the date of purchase and the wood finish in the box to the lower right. WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THE MANUAL FOR FUTURE USE. WARNING: Parents should ensure a safe environment for the child by checking regularly, before placing the child in the product, that every component is properly and securely in place. • DO NOT use this crib if you cannot exactly follow the accompanying instructions. • Infants can suffocate on soft bedding.
AVERTISSEMENT : Le non respect des avertissements et directives d’assemblage peut entraîner de graves blessures ou la mort. LIRE TOUTES LES INSTRUCTIONS AVANT D’ASSEMBLER LE LIT. CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR. AVERTISSEMENT : Avant de placer l’enfant dans ce lit, les parents doivent s’assurer que son environnement est sécuritaire en vérifiant régulièrement que toutes les composantes sont correctement fixées.
ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
Item# 6801 Mercer 3-In-1 Convertible Crib Lit de bébé 3 en 1 Mercer Toddler bed conversion assembly Conversion en lit pour tout-petit C All of the parts and hardware you will need are supplied with the crib at the time of purchase. Les pièces et accessoires de montage dont vous aurez besoin sont fournis avec le lit lors de l’achat.
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 1 X4 vv w 2 ! * Make sure mattress support IV (C) is installed at the lowest level. * Assurez-vous que le support de matelas IV (C) se trouve au niveau le plus bas.
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS AT LEAST 51 5⁄8 IN. (131 CM) IN LENGTH, 27 1⁄4 IN. (69 CM) IN WIDTH, AND A MAX THICKNESS OF 6 IN. (15 CM). POUR ÉVITER TOUT ÉCART DANGEREUX, LE MATELAS UTILISÉ DANS CE LIT DOIT ÊTRE UN MATELAS PLEINE TAILLE D’AU MOINS 131 CM (51 5/8 PO) DE LONGUEUR, 69 CM (27 1/4 PO) DE LARGUEUR ET D’UNE ÉPAISSEUR MAXIMALE DE 15 CM (6 PO).
Registering your product is even easier than before. You can register your product on our website at : www.babyletto.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.BABYLETTO.COM/PARTS OR YOU CAN CONTACT US BY MAIL: BABYLETTO 8700 REX RD., PICO RIVERA, CA 90660 TEL: 323-282-5163 L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à : www.babyletto.