DIAMOND HEATED SMOOTHING BRUSH Model 2440BDU
DIAMOND HEATED SMOOTHING BRUSH The BaByliss Diamond Heated Smoothing Brush features an unique bristle combination for fast, easy straightness with visible shine. The heated ceramic straightening fins straighten the hair as you brush while the flexible taming bristles and detangling combs give gentle grip, tension and control for total smoothing on all hair types. The super ionic technology gives ultimate frizz-control and boosts shine.
SAFETY CAUTIONS • This appliance should only be used as described within this instruction booklet. Please retain for reference. IMPORTANT CHILD SAFETY WARNING! Polythene bags over a product or packaging may be dangerous. To avoid danger of suffocation, keep these wrappers away from babies and children. This bag is not a toy. WARNING! THIS APPLIANCE GETS HOT! •A LWAYS keep out of reach of children (during and after use and whilst cooling).
• Do not use the appliance if the lead is damaged. In the event of damage, discontinue use immediately. If the lead is damaged it must be replaced by the manufacturer. Return the appliance to the Customer Care Centre (refer to 'UK After Sales Service' section for further information). No repair must be attempted by the consumer. • Do not leave the appliance unattended when switched on or plugged in.
of the appliance. • This appliance complies with the requirements of Directives 2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Electrical Safety of Domestic Appliances). DIAMOND RADIANCE SHINE SYSTEM Diamond Radiance Shine System combines luxuriously smooth diamond infused ceramic with active ionic conditioners to transform the hair.
HEAT SETTINGS The heated brush has 3 heat settings. If you have fine, delicate or coloured hair, use the lower heat settings and if you have thick or coarse hair, use the higher heat settings. It is suggested to start on the lowest setting on initial use and increase the temperature until the desired result is achieved. The LED will blink until the temperature selected has been reached. Once the temperature has been reached the LED will remain solid in colour.
• As the heated brush nears the end of the hair, release the hair section with the other hand and turn the heated brush under to give shape at the ends of the hair. • To finish your style and smooth the top of the hair, place the heated brush on the top of the hair section. Use the other hand to pull the section upwards and taut against the heated plate until the bristles penetrate through the hair. Take care to avoid pressing the heated plate against the scalp.
Please note: The release of ions from the ports produces a slight buzzing noise. Useful tips • For best results on thick or curly hair, insert the brush head close to the root, underneath the hair section and glide slowly until you reach the ends of the hair. Then place the heated brush close to the root, on top of the hair section and glide down slowly until you reach the ends of the hair. Repeat as necessary.
AUTO SHUT OFF This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 72 minutes continuously, then it will automatically switch off. If you wish to continue using the appliance after this time, simply slide the switch to the off position and then slide the switch to the desired temperature setting to turn the power on.
UK AFTER SALES SERVICE For further advice on using the appliance or should you need to return your product, please contact the Conair Customer Care Line on 0370 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry to ukinfo@conair.com. The return address is: Customer Care Centre Conair Logistics Unit 4, Revolution Park Buckshaw Avenue Buckshaw Village Chorley PR7 7DW Please enclose your returns number, name and address details, together with a copy of proof of purchase and details of the fault.
UK WIRING INSTRUCTIONS The wires in the mains lead are coloured in accordance with the following code: BLUE = NEUTRAL BROWN = LIVE As the colours of the wire in the mains lead of this appliance may not correspond with the colour marking identifying the terminals on your plug, proceed as follows: • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N. • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L.