User Manual

• This unit is equipped with a
safety thermostat. In the event
of overheating the appliance will
either stop automatically or the
dryer to the ‘‘0’’ position, unplug
and allow to cool for 10 minutes.
Before use, ensure the rear lter is
clear of hair and other debris. Plug
in and switch on. If the appliance
continues to overheat discontinue
use immediately, switch off and
unplug, and contact the Conair
Customer Care Line (refer to ‘UK
After Sales Service’ section for
further information).
•
Take care that the air vents do
not become blocked when in use.
Ensure the rear lter is clear of
hair and other debris before use.
•
Do not place the appliance on any
heat sensitive surface whilst in
operation.
•
Take care to avoid the hot surface
of the appliance coming into
direct contact with the skin, in
particular the eyes, ears, face and
neck.
•
This appliance should not be used
by adults whose reduced physical,
sensory or mental capabilities,
or whose lack of experience and
knowledge, might cause a hazard,
unless they have been correctly
instructed to understand the safe
use and hazards involved and are
adequately supervised.
•
Allow appliance to cool before
storing away.