Operation Manual
- 10 -
Guest mode:
• Place the scales on a hard, level and at surface
• Lightly tap the centre of the scales with your foot to
turn it on
• Wait until the screen displays “00.0KG”
• The scales are ready to be used
• Step onto the scales
• “000” will ash
• Your weight will be displayed on the screen and will
remain displayed for a few seconds
• The scales go out after 5 seconds.
User mode:
• Before the rst use, the scales should be programmed
by the user (cf. PROGRAMMING section).
• Place the scales on a hard, level and at surface.
• Using your foot, press the button corresponding to
your user number.
• The screen will display your user number and
“00.0KG”.
• The scales are ready to be used.
• Step onto the scales.
• “000” will ash on the screen.
• Your weight, your BMI, the dierence in weight com
-
pared to the previous weighing (indicated by “∆ Kg”)
and the coloured indicator related to this dierence
are instantly displayed for a few seconds.
Note: When using the scales for the rst time, no chan-
ge in weight (∆ Kg ) will be displayed.
• Your weight is automatically saved in the memory of
the scales. The scales will beep to conrm the informa-
tion has been saved.
• The scales will go out automatically after 5 seconds.
INTERPRETING THE DATA:
a. Change in weight (∆ Kg)
The scales record your weight after each use. It automa-
tically recalls this information to calculate the change
in weight between the current and the previous wei-
ghings. This dierence is then instantly transcribed into
kilograms on the screen and the extent of this change
appears in the form of a coloured indicator according
to the table below.