Operation Manual
- 12 -
PROGRAMMING
You can program the Monitoring scales very easily and
very quickly. All you need to do is enter your height
into the unit’s memory and that’s it! For every future
use, the scales will automatically recall this information
to calculate your body mass index.
Note: This unit records data for 2 users.
Caution: Every time you reprogram the user memory
(no. 1 or no. 2), you replace the previously saved data.
• When the scales are o, press the button that corres
-
ponds to the number of the user you wish to program
and hold for a few seconds. User 1 presses button ‘1’
while user 2 presses button ‘2’. You will hear a ‘beep’
which indicates that you are in ‘Programming’ mode.
• The number ‘1’ will be displayed on the screen. It shows
you that you are in the session for user 1. The default
setting of 160cm (or the previously saved value) will
also appear for the height and will ash.
• Press on the up and down (‘1’ or ‘2’) buttons to select
your height. The numbers will scroll quickly if you hold
the button down. Once your height appears on the
screen, release the button for 3 seconds. Your height is
now saved. An audible beep conrms this.
• The scales show your user number and displays ‘00.0
Kg’. It is ready to use.
Note: The scales turn themselves o automatically after
5 seconds of non-use.
You have nished entering your personal data.
ERROR MESSAGES
The scales do not display your weight:
• The minimum measurable weight is 5 Kg.
The ‘err’ message may appear on your screen if:
• your weight exceeds 180 Kg
• the dierence in your weight since your last weighing
exceeds 99.9 Kg
• you stepped onto the scales before ’00.0’ appeared.