User Manual
the head, move the clipper upwards and outwards over the area you
want to take shorter.
• Repeat on the sides of the hair, starting with the teeth of the clipper
pointing upwards and comb guide at against the area above the ear,
again moving the clipper upwards and outwards.
Outlining:
• To tidy up the edges around your cut e.g. neckline and sideburns,
detach the comb guide.
• Hold the appliance upside down, so the front of the clipper is facing
towards your head.
• Hold the clipper straight on your sideburns or neckline and move the
clipper downwards. This will give you a clean, smooth nish.
CLEANING & MAINTENANCE
For easy cleaning, the blades on your BaBylissMen clipper are
removable. Regular cleaning will maintain their high performance level.
To clean proceed as follows:
• Remove the comb guide after use. Rinse under running water and
dry thoroughly before storage or use.
• The clipper blade are removable for easy cleaning. To remove the
blades, hold the clipper with the blades pointing upwards and
push the underside of the blade teeth upwards to remove. Do not
disassemble the blades.
• Using the cleaning brush, brush and blow away any remaining hair.
• To preserve your clipper’s efciency, we recommend clianing the
blades regularly. After cleaning, switch the appliance on and oil the
blades using a few drops of the lubricating oil supplied. Only use
the lubricating oil supplied with the appliance as this is specically
formulated for high speed clippers and does not evaporate or slow
the blades.
NOTE: Do not attempt to repair or replace the blades. In the event that
the blades become blunt or damaged, contact the Conair Customer
Care Line (refer to UK «After Sales Service» section for further
information).