User's Manual

3.3 Icons overview
4. Operating the monitor
• The Baby Unit should be placed at least 5 feet away from the baby's crib on a flat surface.
Alternatively, it can be wall-mounted.
• Never place the Baby Unit inside the crib, bed or playpen.
• Make sure the unit, cords and mains adaptor are out of reach of the baby and other young children.
To avoid a strangulation hazard, the power cords should be secured and never be hung on or
near the baby.
• Place the baby monitor in a place where the air can circulate freely and avoid blocking ventilation and
speaker openings.
• Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a
clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a
strong light source or direct sunlight. Avoid installing the camera where there are thick walls or
obstructions between the camera and the monitor.
• To use your Parent Unit and Baby Unit together, you must be able to establish a radio link between
them. The range will be affected by environmental conditions:
- Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced
concrete between the baby and parent Unit may block the radio signal.
- The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical
equipment, such as TV, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
- Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth systems, or
microwave ovens, may cause interference with this product, so keep the baby monitor away at least
5ft (1.5m) from these types of products, or turn them off if they appear to be causing interference.
Note: If you place the Parent and Baby Units too close together you will hear a high pitched noise
called "feedback", this is normal. The units are designed to be located in separate rooms.
4.1 Turning ON the Baby Unit
• Connect the Baby Unit (Camera) Power Adapter to the DC-Jack on the back of the Baby Unit.
• Plug the AC power adapter into the wall outlet.
• The unit will power on automatically and the green power LED will light up.
• Unplug the Baby Unit to turn it off.
NOTE: Only use the AC power adapter included in this package.
4.2 Turning ON the Parent Unit
* Only use the AC adapter included in this package.
* The parent unit is supplied with a pre-installed rechargeable Li-ion battery (3.7V 950mAh). Whenever
possible, connect the Parent Unit to the adapter plugged into the mains, in order to keep the battery
charged.
• Connect the adapter plug into the DC-jack on the right side of the Parent Unit.
• Plug the AC adapter into the wall outlet.
• Press and hold the power key on the top left of the keypad of the Parent Unit.
• Once the Parent Unit is turned on, the power LED will light up and “Babysense Video”
image will display on the LCD.
5
------- Signal
------- Night Light
------- Volume
------ Brightness
------ Lullaby
-------- Night vision
--------- ECO
------ Camera
----- Zoom
------- Temperature
-------- Battery
----- Talk to baby
78F
˚