Video Baby Monitor By Camera model V43TX(PTZ) User Manual Wireless Digital Video Baby Monitor Watch, Listen and Talk to Your Baby Baby Monitor Model: V43RX For any product related quest on please contact us at service@hisense.co.il or Toll Free Number (833) 568-2229 www.babysensellc.
EN Table of Contents 1 Warnings and Safety Instruc�ons 1.1 WARNINGS: 1.2 Safety Instruc�ons for AC Power Adapter 1.3 Safety Instruc�ons for Li-ion ba�ery 1.4 Informa�on on disposal of ba�ery and product 3 3 4 5 5 2 Overview 2.1 Pack Contents 2.2 Parent Unit Overview 2.3 Baby Unit Overview 2.4 Icons Overview 6 6 6 7 7 3 Ge�ng Started 3.1 Powering Baby Unit (Camera) 3.2 Powering Parent Unit 3.3 Charging Parent Unit 3.4 Set Up 8 8 8 8 8 4 Opera�ng the Monitor 4.
EN 1. Warnings and Safety Instruc�ons Follow these safety precau�ons to prevent fire, injury or damage to the product. Read and keep instruc�ons: It is very important that you read all the safety and opera�ng instruc�ons before the Babysense Video Monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required. 1.1 WARNINGS: • STRANGULATION HAZARD: Children can become entangled in cords.
EN • BATTERY: Before you use the product, we recommend you fully charge the ba�ery of the Parent Unit, so that it con�nues to work if you disconnect it from the power supply to carry it to another loca�on. • INSTALLATION LOCATION: The installa�on loca�on plays an important role in ensuring proper opera�on. Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi−Fi routers, otherwise they could cause interference.
EN 1.3 Safety Instruc�ons for Li-ion ba�ery • Do not a�empt to repair or adjust any of the electrical or mechanical func�ons of the unit. • Do not dismantle, cut, open, crush, bend, puncture, or shred cells or ba�eries. • If a ba�ery leaks, do not let the ba�ery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, and seek medical assistance.
EN 2. Overview 2.1 Pack Contents • • • • • • Parent Unit x 1 Baby Unit (Camera) x 1 AC Power Adapter x 2 Rechargeable Lithium Ion Ba�ery (pre-installed) x 1 Set for wall moun�ng x 1 User Manual x 1 2.2 Parent Unit Overview 1 2 3 5 4 12 12 6 7 15 8 16 10 9 11 13 14 1. Power ON/OFF/SLEEP Bu�on 2. Charging LED 3. Power LED 4. Volume level LEDs 5. Volume Up/Down Bu�ons 6. MENU/OK bu�on 7. ZOOM/EXIT bu�on 8. Pan/Tilt/Menu naviga�on keys 9. Camera Switch bu�on 10. Talk Back bu�on 11.
EN 2.3 Baby Unit Overview 3 1 2 7 6 4 8 5 12 10 11 1. Infrared LEDs 2. Lens 3. Light sensor (Night Vision) 4. Power LED 5. Night Light 6. Microphone 9 7. Temperature Sensor 8. ON/OFF switch 9. DC Jack 10. Speaker 11. PAIR Bu�on 2.
EN 3 Ge�ng Started 3.1 Powering The Baby Unit (Camera) • Connect the Camera Power Adapter to the DC-Jack (9) on the back of the Baby Unit. • Ensure the ON/OFF Switch (8) is in the ON posi�on. • Plug the AC power adapter into the wall outlet. • The unit will power on automa�cally and the green power LED (4) will light up. • Use the ON/OFF Switch (8) to turn the Baby unit off. NOTE: Only use the AC power adapter included in this package. 3.
EN • Never place the Baby Unit inside the crib, bed or playpen. • Make sure the unit, cords and mains adaptor are out of reach of the baby and other young children. • To avoid a strangula�on hazard, the power cords should be secured and never be hung on the crib or near the baby. • Place the baby monitor in a place where the air can circulate freely and avoid blocking the ven�la�on and speaker openings.
EN 4.3 Scan Mode - Automa�c switching between the paired Baby Units (Cameras) You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 10 seconds and then the screen will automa�cally change to the next paired Baby Unit. • Press and hold the CAMERA SWITCH bu�on (9) to ac�vate the automa�c SCAN mode. A loop sign will appear next to the camera number on the top of LCD screen.
EN 4.6 Audio Only Mode (Video OFF – Audio ON) • Briefly press the power bu�on (1) to turn the LCD screen ON or OFF. NOTE: This mode will turn the video transmission off but s�ll allow you to hear sounds from the camera/s. • Press the power key again to resume the video transmission. 4.7 Talk To Baby • Press and hold the TALK bu�on (10) on your Parent Unit to talk to your baby or partner in the baby’s room via Baby Unit.
EN • Press the MENU/OK bu�on (6) on your Parent Unit and the menu screen will pop up. • Navigate using the PAN/TILT/MENU NAVIGATION keys (8) un�l the Temperature icon is highlighted in red. • Press the PAN/TILT/MENU NAVIGATION keys (8) to select the desired temperature scale (°F or °C) and press the MENU/OK bu�on (6) to confirm. • Press the EXIT bu�on (7) to exit the menu. NOTE: The temperature default se�ng is °F (Fahrenheit). NOTE: The monitor features a built-in automa�c temperature alarm.
EN 4.14 Night Light This monitor features a night light integrated into the Baby Unit (5), allowing you to remotely ac�vate a comfor�ng glow in baby's room. There are 3 light levels (from low to high) to choose from. • Press the MENU/OK bu�on (6) on your Parent Unit and the menu screen will pop up. • Navigate using the PAN/TILT/MENU NAVIGATION keys (8) un�l the NIGHT LIGHT icon is highlighted in red.
EN Cannot hear the baby sounds on the Parent Unit • Volume se�ng on the Parent Unit may be too low. Increase the volume. • Ba�ery power may be too low. Recharge the ba�ery. Background noises • In a quiet environment, surrounding the Parent Unit, decrease the volume on your Parent Unit to level 3 and below. • In a loud environment, surrounding the Parent Unit, increase the volume to the maximum level. • Automa�c Night vision mode may be on.
EN 7. SPECIFICATIONS Product Model V43RX(Present Unit),V43TX(PTZ)(Baby Unit) Frequency Type of Modulation Data Rate Channel Bandwidth Transmission Range Input Voltage Power Adapter 2.4GHz FHSS GFSK 4 Mbps 3.5 M Up to 960 feet / 300 meters (open space – no obstructions) 5V, 700mA Input: 240-100VAC 50/60 Hz, 300mA Max; Output: 5V, 700mA; LCD Screen 4.
EN 9. IC Statements This device complies with Industry Canada license-exempt RSS standard(s): Opera�on is subject to the following Two condi�ons: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired opera�on of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.