User's Manual
Press to access the menu, choose and press
Press and press
Navigate with to select the desire option.
Press to exit the menu.
1113
4.7 Temperature Alert Setting
ALERT
Press OK buon
to confirm
NOTE: The monitor features a built-in automatic temperature alert. The monitor will alert (visual
indication) when the temperature in baby’s room is too high (90°F and higher) or too low (55°F and
lower).
NOTE: Make sure the temperature sensor is not positioned too close to the camera body as it may
affect the correct temperature reading. It is recommended to stretch out the sensor, so it is as far away
from the camera body as possible. Also, it is recommended to place the camera in an area where there
is good air circulation and not in a closed cornered area where the temperature tends to be higher.
This function is to alert if the temperature in baby’s room is too low or too high.
Default setting is: <15 °C/59 °F and >31 °C/89 °F.
To change the temperature alert levels, please follow the below instructions:
1.
2.
3.
4.