User's Manual

11131116 11131118
• Press and hold the CAMERA SWITCH button (11) to activate the automatic SCAN mode. A SCAN MODE
ON message will appear on the screen and a loop sign will appear next to the camera number on the
top of LCD screen.
• Press the CAMERA SWITCH button (11) to deactivate the Scan mode
14
4.14 Night Light
This monitor features a night light integrated into the Baby Unit (22), allowing you to remotely activate a
comforting glow to baby’s room. There are 3 light levels (from low to high) to choose from.
• Press the button on your Parent Unit to choose the desired light intensity.
NOTE: The Night Light status icon will be displayed on top of the LCD screen.
NOTE: Night Light feature can also be activated manually on the Baby Unit. Briefly press the PAIR button
(28) on the bottom of the Baby Unit to cycle between the intensity levels.
4.15 Zoom Section
This baby monitor features two-zoom levels: x2 and x4.
4.16 Switching between the paired Baby Units (Cameras)
NOTE: This function is only available when two or more cameras are paired.
• To switch between paired cameras – briefly press the CAMERA SWITCH button (11) on your Parent Unit.
4.17 Scan Mode - Automatic switching between the paired Baby Units
You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 15
seconds and then the screen will automatically change to the next paired Baby Unit.
NOTE: This function is not available when SPLIT SCREEN mode is ON.
1. Press the button (9) once to activate “x2” zoom option.
2. Press the button (9) twice to activate “x4” zoom option.
3. Press the button (9) again to exit zoom option.