User's Manual

4.2 VOX Mode

NOTE: Once the lullaby function is turned on, the lullaby icon will be displayed on top of the LCD screen.

NOTE: The lullaby default setting is OFF.

NOTE: When selecting the loop mode only the 5 melodies are played; the White Noise is excluded.

When using the VOX function, the sound and video transmission will stop (standby mode) if the Baby Unit

does not register any sound within 30 seconds.

While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the set

sensitivity level, it will automatically start transmitting the signal (sound and video) to the Parent Unit

and the LCD screen will turn on.

NOTE: VOX default setting is OFF.

To change the VOX Level: please follow the following instructions:

High

White

Noise

White

Noise