Video Baby Monitor By USER GUIDE Model: V24US www.babysensellc.com Toll Free Number - (833) 568-2229 Email - service@hisense.co.
1. Warnings and Safety Instructions Follow these safety precautions to prevent fire, injury or damage to the product. Read and keep instructions: It is very important that you read all the safety and operating instructions before the Babysense video monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required. IMPORTANT: • Strangulation Hazard: Children can become entangled in cords.
2. Pack Contents • Parent Unit x 1; • Baby Unit x 1; (x 2 in model V24US_2 - Monitor with two cameras) • AC Power Adapter x 2; (x 3 in model V24US_2 - Monitor with two cameras) • Li-ion Battery (built-in in Parent Unit) x 1; • User Manual x 1; • Wall mounting set x 1; (x 2 in model V24US_2 - Monitor with two cameras) 3. Product Overview 3.1 Parent Unit overview 2 3 14 1 4 5 13 6 12 15 7 11 8 9 16 10 3.
3.3 Icons overview ------- Signal ------- Volume ------ Alarm ------ Brightness ------ Lullaby --------- ECO ------ Camera -------- Battery ----- Zoom ----- Talk to baby 78˚F ------- Temperature -------- Night vision 4. Getting Started 4.1 Turning ON the Baby Unit (Camera) * Only use the AC adapter included in this package. • Connect the adapter plug into the connector socket (DC-Jack) on the back of the Baby Unit (24). • Plug the AC adapter into the wall outlet.
• Place the baby monitor in a place where the air can circulate freely and avoid blocking ventilation and speaker openings. • Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.
5.4 Deleting the Baby Unit (Camera) • Press the MENU/Exit key (12) and the menu screen will be displayed on the Parent Unit. • Press the LEFT key (10) or RIGHT key (8) until the camera icon is highlighted in red then press UP key (5) or DOWN key (9) to select the desired camera to delete. It will start blinking. • Then at the back of the Baby Unit, press and hold the "PAIR" button until the connection is established. • The above procedure will automatically remove the Baby Unit you want to delete.
5.8 Volume adjustment • Press the UP (5) key to increase the volume. • Press the DOWN (9) key to decrease the volume. 5.9 Brightness adjustment • Press the LEFT (10) key to decrease the brightness. • Press the RIGHT (8) key to increase the brightness. 5.10 Temperature Setting The temperature reading from the temperature sensor (22) at the back of the Baby Unit will be displayed on the top of the screen.
5.13 Infrared Night Vision (Automatic) • The infrared night vision function allows the camera to pick up images of your baby or the monitored area in dark or low light conditions. • In this mode, only black and white colors will be displayed on the Parent Unit screen. • When the camera is in night vision mode, the icon will be displayed on top of the LCD screen. • The optimum image is obtained up to 6 feet (2 meters) distance between baby unit and object. 6.
. Troubleshooting Problem Possible cause(s) No reception on the Parent Unit • The power adapters may not be properly connected. • Ensure that the Baby and Parent Units are ON. • Make sure the Baby Unit and Parent Unit are not far away from each other. • Baby Unit and Parent Unit may not be properly paired. Follow PAIRING instructions (section 5.1, page 4). Interference or poor reception • Move the Baby unit closer to Parent unit. • Use of other 2.
. Technical Data Frequency Operating Range Power Adapter LCD Screen Rechargeable battery (built-in in Parent Unit) Operating time with battery fully charged (Parent Unit) * It takes about 8 hours to fully charge the battery. Transimitting Power Image sensor type IR LED Type Operation Environment 2.4GHz FHSS Up to 960 feet (open space) Input: 100-240VAC 50 / 60Hz, 200mA Max; Output: 5V, 600mA; 2.4” TFT LCD Model: YB 503450 3.7V, 950 mAh, 3.515Wh Approx. up to 12 hours (ECO on) 18dBm Max 1/6.
• The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat register or other appliance that emits heat. • Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. • Use only the battery supplied (built-in) with the product.
Video Baby Monitor By V.INT.UG.04.ENV24US.11.
