User Guide

• The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator,

heat register or other appliance that emits heat.

• Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or

expose it to water or other liquids. Batteries may explode if damaged.

• Use only the battery supplied (built-in) with the product. Improper use, or use of unapproved batteries

may present a risk of ﬁre, explosion, or other hazard, and may invalidate any approval or warranty.

• If you believe the battery is damaged, remove product from the chargerand stop using the product.

Never use a damaged battery.

13. Information on disposal of battery and product

• Always dispose of your battery and product at the end of their life in an environmentally responsible way and

in accordance with your local waste disposal requirements. All cardboard and paper packaging materials should

be recycled in accordance with your local council waste regulations.

Thank you for choosing Babysense Video monitor from Hisense Ltd.

14. FCC STATEMENTS:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired

operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modiﬁcations to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

15. IC STATEMENTS:

This device complies with Industry Canada license-exempt RSS standard(s):

Operation is subject to the following Two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts

de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareiI ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le fonctionnement.