User Guide

ManualsBrandsBabysense ManualsBaby ProductsVideo Baby Monitor with Camera and Audio, Long Range, Room Temperature, Infrared Night Vision, Two Way Talk Back, Lullabies, VOX and Long Battery Life, Model: V24US

3.3 Icons overview

4. Getting Started

4.1 Turning ON the Baby Unit (Camera)

* Only use the AC adapter included in this package.

• Connect the adapter plug into the connector socket (DC-Jack) on the back of the Baby Unit (24).

• Plug the AC adapter into the wall outlet.

• Power LED (2) will light up and the unit will turn on automatically once the adapter is connected to the

wall outlet.

4.2 Turning ON the Parent Unit

* Only use the AC adapter included in this package.

* The parent unit is supplied with a built-in rechargeable Li-ion battery (3.7V 950mAh). Whenever

possible, keep the Parent Unit plugged in to keep the battery charged.

• Connect the adapter plug into the DC-jack on the left side of the Parent Unit (13).

• Plug the AC adapter into the wall outlet.

• Press and hold the power key on the top left side of the Parent Unit;

• Once the Parent Unit is turned on, the power LED will light up and “Babysense Video”

image will display on the LCD.

4.3 Charging the Parent Unit

• Connect the power adapter to the Parent Unit (13);

• Plug the adapter into the wall outlet.

• Charging LED on the Parent Unit will light in RED (2).

• When unit is turned on, the charging LED will light in ORANGE and battery charging icon (changing

bars) will appear at the top right corner of the LCD screen.

• It takes about 8 hours to fully charge the battery.

• Full battery indicator (4 ﬁxed bars) will appear at the top right corner of the LCD screen,

indicating the battery is fully charged.

Note: Before the ﬁrst use or after a long product storage, it is recommended to fully charge the Parent

Unit battery prior to operating the monitor.

4.4 Set Up

• The Baby Unit should be placed at least 6 feet (2 meters) away from the baby's crib

on a ﬂat surface. Alternatively, it can be wall-mounted.

• Never place the Baby Unit inside the crib, bed or playpen.

• Make sure the unit, cords and mains adaptor are out of reach of the baby and other

young children. To avoid a strangulation hazard, the power cords should be

secured and never be hung on or near the baby.

------- Signal

------- Volume

------ Brightness

------ Alarm

------ Lullaby

-------- Night vision

--------- ECO

------ Camera

----- Zoom

------- Temperature

-------- Battery

----- Talk to baby

78˚F