User Guide

Fyrite

INSIGHT

Plus Manual Configuration
0024-9487 Rev 1 53
Diagnostics Menu Function
The Fyrite

INSIGHT

Plus will show that the O
2
sensor needs to be replaced, and an error message is
displayed (see below).
In this case:
• Note the 3-digit date code on the new sensor
• Replace the O
2
sensor
• Press F3 to change and verify sensor date code.
Resetting the Sensor Date Code
Use the LEFT () and RIGHT () arrow buttons to
move the cursor horizontally to select between the
2-digit month code (00-12) and the one digit year code
(0-9 corresponding to the last digit of the manufacture
year) that make up the 3-digit date code.
Use UP () and DOWN () arrow buttons to
increment and decrement the selected field’s value.
When finished, press ENTER to save the changes.
NOTE: Entering a value of 000 (three
zeros) disables this feature.
Next, verify the current month and year. Use the
arrow keys to edit the current month and year (if
needed) and press ENTER to confirm.