User Guide

Fyrite

INSIGHT

Plus Manual Troubleshooting
0024-9487 Rev 1 93
Message Description
Set Clock Time and date values need to be set in the instrument.
NOTE: If a “set clock” message occurs, then the
instrument ignores CO calibration reminder
messages and all O
2
–related messages except
“Bad Sensor.”
Cal Reminder
## months
The calibration reminder occurs during warmup and is based on
the CO calibration reminder setting (see page 45), the current
date setting (see 35), and the date of the last calibration of the
CO sensor.
X X X Occurs in the number fields of sensors that have achieved over-
range condition.
* * * Occurs in the number fields of sensors. Replaces in-error sensor
values and any calculated values that depend on those sensor
values.
- - - Occurs in the number fields of sensors and indicates that values
were not calculated.
NOTE: If a particular sensor is in error during warmup, the
instrument automatically displays the error. The instrument
continues to operate with the sensor in error, however
information dependent on the sensor in error is not displayed.