Specifications

CO2 Analyzer 2810/2815/2820
Instruction 19-9222
8
CO2 Analyzer 2810/2815/2820
Instruction 19-9222
9
3.0 MAINTENANCE
3.1 Cleaning
Keep the analyzer clean by wiping it with a soft cloth dampened with a
mild detergent solution.
3.2 Sunlight
The unit should not be left out in direct sunlight, or in other areas where
excessive heat exists, for long periods since component damage due to
overheating may result.
3.3 Servicing
There are no user-serviceable parts inside the analyzer. Unauthorized
disassembly of the unit will invalidate the warranty.
3.4 Software Version / Serial Number
With the analyzer switched OFF, and while holding down the f
1
button,
switch ON the analyzer to display its software version and issue date.
Releasing the f
1
button displays the analyzer’s ID number for 5 seconds.
3.5 Factory Settings
Important! The analyzer should only be returned to its fac-
tory settings when advised by a Bacharach Service Repre-
sentative.
With the analyzer switched OFF, and while holding down the f
2
button,
switch ON the analyzer. The display will show
Keep the f
2
button depressed until the display shows
Cd v1.24
20/5/98
ID No.
xxxxx
RESET OK
FACTORY
SETTINGS
→