Specifications

Instruction 0019-9208
13
N
2
O Monitor 3010
3.2 Cleaning
Keep the monitor clean by wiping it with a soft cloth dampened with a
mild detergent solution. The monitor can be sterilized by using iso pro pyl
wipes. Do not immerse the unit in any sterilization agent.
3.3 Sunlight
The unit should not be left out in direct sunlight, or in other areas where
excessive heat exists, for long periods since component damage due to
overheating may result.
3.4 Servicing
There are no user-serviceable parts inside the monitor. Unauthorized dis-
assembly of the unit will invalidate its warranty.
3.5 Software Version / Serial Number
With the monitor switched OFF, and while holding down the f1 button,
switch ON the monitor to display its software version and issue date. Re-
leasing the f1 button displays the monitor’s ID number for 5 sec onds.

3.6 Factory Settings
Important! The monitor should be returned to its factory set-
tings only when advised by a Bacharach Service Center.
With the monitor switched OFF, and while holding down the f2 button,
switch ON the monitor. The display will show
Keep the f2 button depressed until the display shows