Specifications

Instruction 0024-9460 12
Fyrite
®
INSIGHT
3.5 Setup Mode
The analyzer is preset at the factory for the parameters shown below, but
can be changed as described in their corresponding sections.
Function Parameter To Change
Fuel Natural Gas Section 4.3
Temperature Unit °F Section 3.5.2
Pressure Unit InWC Section 3.5.3
Language English Section 3.5.10
CAL Reminder Never Section 3.5.12
Clock Not Initialized Section 3.5.4
3.5.1 Entering Setup
1. Display the MAIN MENU by pressing the
MENU (F2) button.
2.Usethe▲▼buttonstohighlightSETUP
and press ENTER to display the SETUP
MENU.
3.5.2 Temperature Units
Select to display temperature in either ºF or ºC as follows:
1. Enter the Setup Menu per Section 3.5.1. If necessary, press ESC
until MENU appears above F2.
2.FromtheSETUPMENU,usethe▲▼but-
tons to select TEMPERATURE UNITS.
Press ENTER to display the Temperature
Units Menu.
3. Usethe▲▼buttonstoselectthedesired
temperature unit.
4. Press ENTER to save selection and return
to the SETUP MENU or ESC to revert the
previous setting.