Specifications

Instruction 0024-9460
17
Fyrite
®
INSIGHT
Change the order in which data is displayed as follows:
1. Enter the SETUP MENU per Section 3.5.1. If necessary, press ESC
until MENU appears above F2.
2.Usethe▲▼buttonstoselectRUN/HOLD
FORMAT. Press ENTER to display the
Run/Hold Format options.
3.Usethe▲▼buttonstoselectEDITFOR-
MAT. Press ENTER to display the current
format.
4. Change data for a particular location by
rstusingthe▲▼buttonstoselecttheloca-
tion. Press ENTER and the cursor will start
toash.
5.Usethe▲▼buttonstoscrollthroughand
select the desired data to appear in that
location. Press ENTER to save the selection.
6. Change the data displayed at other locations
by repeating steps 4 and 5.
7.Whennished,usethe▲▼buttonstoselectEDITCOMPLETE,
located at the bottom of the list. Press ENTER to save the new dis-
play format and return to the Run/Hold Format options.
Reset Display format back to factory default settings as follows:
1. Enter the SETUP MENU per Section 3.5.1.
If necessary, press ESC until MENU ap-
pears above F2.
2.Usethe▲▼buttonstoselectRESETFOR-
MAT. Press ENTER to display the Reset
Format option.
3.Usethe▲▼buttonstoselectYES.Press
ENTER to reset the format and return to the
Run/Hold format options.