Specifications

Instruction 0024-9460 20
Fyrite
®
INSIGHT
3.5.14 Post-Purge Period
The analyzer can be setup to purge the sensors following the combustion
test. It can be programmed to purge for None, 5 seconds, 1, 5, or 10 min-
utes.
Set the Post-Purge Period as follows:
1. Enter the SETUP MENU per Section 3.5.1.
If necessary, press ESC until MENU ap-
pears above F2.
2.Usethe▲▼buttonstoselectPOST-PURGE
PERIOD. Press ENTER to display the Post-
Purge Period Menu.
3.Usethe▲▼buttonstoselectthedesired
time period.
4. Press ENTER to save the selection and re-
turn to the SETUP MENU or ESC to revert
to the previous setting.
3.5.15 Date Format
The date format options and the clock settings are interdependent.
MM/DD/YY format - Used with a 12 or 24 hour time clock. The set up
menu includes an AM/PM option.
DD/MM/YY format - Used with a 24 hour time clock.
Change the date format as follows:
1. Enter the SETUP MENU per Section 3.5.1.
If necessary, press ESC until MENU ap-
pears above F2.
2.Usethe▲▼buttonstoselectDATEFOR-
MAT. Press ENTER to display the Date
Format Menu.
3.Usethe▲▼buttonstoselectthedesired
date format.
4. Press ENTER to save the selection and re-
turn to the SETUP MENU or ESC to revert
to the previous setting.