Specifications

Instruction 0024-9460 32
Fyrite
®
INSIGHT
3.Usethe▲▼buttonstoselectMemoryDirec-
tory. Press ENTER to display the saved data
contained in the Memory Directory.
TIP: When displaying the contents of the
memorydirectory,theoperatorcanquickly
page through the screens by pressing the
PAGE– (F1) and PAGE+ (F3) buttons. Or
move to the first or last memory location by
pressing the buttons, respectively.
ToClearTestData:
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2.Usethe▲▼buttonstoselectMEMORY.
Press ENTER to display the Memory Screen.
3.Usethe▲▼buttonstoselectCLEAR
MEMORY. Press ENTER to display the
Clear Memory Options.
4.Usethe▲▼buttonstoselectYESandpress
ENTER. The screen will briefly display a
confirmation that the memory has been
cleared.
4.14 Printing Test Data
Combustion, pressure, or temperature data that is currently being dis-
played can be sent to a printer using IrDA protocol as described below.
Data that is stored in memory can also be printed by first displaying the
stored test data as described in Section 4.13.
In addition to printing combustion, pressure, and temperature data, the
contents of any screen that shows the label “PRINT” above the F1 button
can be printed. For example, the information shown in the DIAGNOSTIC
screen can be printed.