Specifications

Instruction 0024-9460

Fyrite

INSIGHT

Parts & Tools Required:

• Replacement pump (P/N 0024-3049 or P/N 0024-3073)

• Medium phillips screwdriver

Procedure:

1. Gain access to the gas pump by removing the rear case. Refer to Sec-

tion 6.1.

2. Disconnect J9 (pump) and J11 (Battery) connectors.

3. Lift the circuit board out of the unit.

4. Remove the screw that secures the pump to the board in order to

separate the pump from the board.

5. Remove tubing from pump.

6. Install new pump by reversing this procedure.

Item PCB Rev 0 PCB Rev 1

Serial # (Back of

Instrument)

PCB Label (To

Conrm Rev #)

Pump/Harness

Part Number

Connector

Style on Pump

Wiring Harness

(Colors May Vary)

PCB Header Style

Wiring Harness

Only (Reference

P/N for Service

Personnel Only)

< RU1025

(= Rev 0)

≥ RU1025

(= Rev 1)

0024-1450

0 xxxxxxxx

0024-1450

1 xxxxxxxx

Order P/N: 0024-3049 Order P/N: 0024-3073

P/N: 0024-1410 P/N: 0024-1521