Specifications

Instruction 0024-9460

Fyrite

INSIGHT

USER INFORMATION - The instrument will accept up to three lines of

20 characters of user information. This information will appear with the

test records when they are printed or downloaded.

CALIBRATION AND REMINDERS - Calibration can be performed by

applying gas and entering calibration gas concentrations through software

menu selections. Calibration reminders can be set for Never, 6, 8, 10, 12,

or 15 months.

SMART SENSORS - B-Smart sensor technology is employed for the CO

channel. CO sensors are calibrated prior to shipment and provide data that

can be entered through the software menu selections for easy calibration

without applying gas.

DISPLAY FORMAT AND ZOOM- The Run/Hold display format can be

presentedindefaultorcustomorderedforspecicneeds.Upto8lines

can be customized in the Run/Hold screen. Combustion test data in the

Run/Hold screens can be shown with enlarged characters to make viewing

easier. The complete list of Run/Hold data can be scrolled through for all

zoom levels. Available zoom levels and information display are as follows:

•Standard-4linesofinformation

•2X-3linesofenlargedcharacters

•3X-2linesofenlargedcharacters

STATUS - A status menu displays the instrument software version, boot

version, model number, and serial number.

DIAGNOSTICS - The diagnostics menu displays the O2 sensor life, CO

sensor information, and hours of operation (for the instrument and pump).

KEY PA D SOUND - Keypad sounds can be enabled or disabled with soft-

ware menu selections.

LOW BATTERY - A tone will sound every 10 seconds when a low battery

condition exists. A low battery message will also be displayed.

AUTOMATIC POWER DOWN - The instrument can be set to automati-

cally power off after a period of inactivity unless the user presses any but-

ton; the CO is greater than 50 ppm, or the O2 is less than 16.0%. Auto-

matic power down can be set for None, 30, or 60 minutes.

PURGE - The sensors will be purged when the instrument is shutdown

until sensor outputs indicate that they have been exposed to fresh air.

Pressing the On/Off key a seconds time can defeat the purge routine. The

minimum purge time can be set to None, 5 seconds, 1 , 5, or 10 minutes.