Specifications

Instruction 0019-9321

Comfort Chek 100/200

2.7 Storing Readings

There are two storage modes available:

• Snapshot

• Continuous Data Logging

Pressing the f

button once stores (takes a snapshot of) the reading

shown on the display.

Pressing and holding down the f

button for at least 3 seconds starts the

continuous data logging of the readings at a preset interval (factory set

at 15 minutes).

The instrument can store from 100 to 200 readings based on the instru-

ment’s conﬁ guration. Logging will stop once the instrument’s storage

capacity has been reached.

The stored data can be downloaded to a personal computer using the

instrument’s IrDA link and the optional BACH-COM software. This soft-

ware can also be used to alter the data-logging interval; produce tables

and plots of time-based CO

readings; and clear all logged data from

memory.

2.8 Battery Low Display

When the battery voltage falls below a pre-determined level, the display

will alternate between its current or peak display and

In addition, the beeper will emit three rapid notes every 30 seconds. At

this time the instrument should be given a full charge per Section 3.6 as

soon as possible.

BattLow

340

CO2 ppm

340

Clock icon is displayed once for

a snapshot, and ﬂ ashes during

continuous logging.