Instruction manual

Instruction 0024-9396

Fyrite Pro Quick Reference Guide

Saving Test Data in Memory (Model 105/110/120/125)

Up to 10 individual sets of test data can be saved in memory as follows:

Note: When memory is full, the next reading saved will over-

write the oldest reading.

Note: The analyzer’s setup information is stored along with

the test data. For example, temperatures stored in °C are

recalled and printed in °C even if the analyzer is currently set

up for °F.

1. With the analyzer is in its Run Mode, press the HOLD button twice

to display the Print Screen.

2. Press the  button once to display the Save Screen. The number

shown in this screen represents the memory location (1 thru 10) to

which the current test data will be saved.

3. Press ENTER to save the test data and return to the Hold Mode, or

press HOLD to return to the Hold Mode without saving.

Opening and Viewing Saved Test Data

(Model 105/110/120/125)

Perform the following to open and view saved test data:

Note: If no test data has been saved, the option to open the

memory for viewing will not be available.

1. With the analyzer is in its Run Mode, press the HOLD button twice

to display the Print Screen.