Instruction manual

Instruction 0024-9396

Fyrite Pro Quick Reference Guide

2. Press the  or  button until the Open Screen is displayed, and

then press ENTER to open the memory locations for viewing. The

number shown in the second screen represents the most recent

memory location where data was stored.

3. Press the  or  button to scroll to the desired memory location, and

then press ENTER to recall the stored data and return to the Hold Mode.

While in the Hold Mode, the recalled data can be viewed using the 

and  buttons, or printed per Section Printing Test Data on Page 16.

Clearing Saved Test Data (Model 105/110/120/125)

Clear all saved test data as follows:

Note: If no test data has been saved, the option to clear

memory will not be available.

1. With the analzyer in its Run Mode, press the HOLD button twice to

display the Print Screen.

2. Press the  or  button to scroll to the Clear Screen, and then press

ENTER to display the Clear All Screen.

3. Press ENTER to clear memory and return to the Hold Mode, or press

HOLD to return to the Hold Mode without clearing memory.