Specifications

Instruction 0024-9395
15
Fyrite Pro
3.5.7 Year Setup
The Year Setup Screen is labeled “YEAr”.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press ENTER until the Year Setup Screen is displayed.
2. Press the ▲ or ▼ button until the correct year is displayed.
3. Press ENTER to move to the next Setup Screen, or I/O to exit setup.
3.5.8 Selecting Printer Protocol
The analyzer can be set up for either an HP or IrDA type printer.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press ENTER until one of the following screens is displayed.
2. Press the ▲ or ▼ button to select the desired printer protocol.
3. Press ENTER to move to the next Setup Screen, or I/O to exit setup.
3.5.9 Exiting the Setup Screen
Press the I/O button at any time to exit the Setup Mode and turn OFF the
analyzer. Note that the last displayed parameter is automatically saved in
memory.