Specifications

MODEL 300 COMBUSTION ANALYZER
Instruction 24-9223 1-5
1.4.2 Left Display and Select Key
Figure 1-1. Left Display
Press to show TEMP, CO (ppm), or ERROR information on the
four-segment alphanumeric display. Also press with the FUEL
key held down to change fuels after performing an efficiency
test.
The Display Mode Indicators identify what is being shown on
the display.
Display Mode
Indicator Lit Meaning of Display Indication
CAL – Combustion Analyzer in calibration mode.
Press CAL key to start 60 second calibration cycle.
FUEL – Combustion Analyzer awaiting fuel informa-
tion. Press FUEL key until the fuel being burned is
shown in the display (See Table 2 in the front of this
manual).
RUN – Combustion Analyzer ready to perform
efficiency testing. Press RUN key to start test.
None