Specifications

MODEL 300 COMBUSTION ANALYZER
2-10 Instruction 24-9223
If a setting is not changed, depressing the SET switch merely
reconfirms that setting as it cycles you to the next setting – including
exiting from that clock-set mode.
If a change is made to the time format (CK:12 or CK:24), the hour of
the day (PM:__ or HR:__) will also need to be reset.
d. Repeat steps “a” thorough “c” until all clock modes are correct; then
press the MODE switch until the clock display returns to the
current time.
2.8 OPTIONAL ANALYZER CONFIGURATION
Analyzer configuration is determined by ten internal switches, which
should have been preset by the Bacharach Sales Center per the
sales agreement. If, however, a switch setting needs to be changed,
refer to Section 5.8.
Figure 2-5. Clock Display Switches