Specifications

MODEL 300 COMBUSTION ANALYZER
Instruction 24-9223 3-7
3.4 PRINTER OPERATION
Press the PRINT switch (Fig. 3-4) to obtain a hard copy of the efficiency
test results either during an efficiency test, or after its completion – the
printer will not operate at any other time. Observe that the PRINT LED
will glow as the printer operates. Fig. 3-5 shows a typical printout.
NOTE: If the right display shows three dashes while printing,
the numbers printed for % efficiency, % stack loss, and % carbon
dioxide are invalid.
After printing, press and hold the PAPER ADVANCE switch to advance
paper before tearing. Advance paper as much as necessary to leave
enough space for writing your comments at the end of the printout.
In the Optional units, each of the different language printouts can show
the same information in the same sequence, except for the date. Most
units show the date as month/day/year, while all Siegert units show the
date as day, month, year.
Figure 3-3. Installing the Probe