Specifications

MODEL 300 COMBUSTION ANALYZER
Instruction 24-9223 5-13
5.6 PRINTER PAPER REPLACEMENT
Equipment Needed (See Section 6 for Part Numbers)
• Replacement Paper Roll
Procedure
1. Open the printer by pressing its spring-loaded latch on the left-hand
side of the printer’s front panel. See Fig. 5-6.
2. The paper-roll carrier is mounted on the rear of the printer’s front
panel and will swing out when the printer is opened.
3. Pinch in the two paper-roll clips at the end of the paper carrier, and
then remove the empty roller from the carrier.
4. Install a new paper roll onto the paper carrier.
5. With the analyzer turned on, present the paper to the entry point at
the lower edge of the printer’s feed mechanism. The paper will be
sensed by the mechanism and be automatically fed through the printer
and into the proper position for printing.
Figure 5-6. Installing Printer Paper
FRONT PANEL
LATCH
PAPER CARRIER
PAPER FEED
MECHANISM
PAPER ROLL
CLIPS