Specifications

Instruction 19-9326
11
Monoxor III
3.4.6 Year Setup
The Year Setup Screen is labeled “yEAr”.


1. Enter the Setup Mode per Section 3.4.1. If necessary, repeatedly
press ENTER until the Year Setup Screen is displayed.
2. Press the  or  button until the correct year is displayed.
3. Press ENTER to move to the next Setup Screen, or I/O to exit setup.
3.4.7 Selecting Printer Protocol
The Printer Setup Screen is labeled “Prnt”. The analyzer can be set up to
send data to a wireless printer using either HP or IrDA protocol.
1. Enter the Setup Mode per Section 3.4.1. If necessary, repeatedly
press ENTER until the Printer Setup Screen is displayed.
2. Press the  or  button to select the desired protocol.
3. Press ENTER to move to the next Setup Screen, or I/O to exit setup.
3.4.8 Exiting the Setup Screen
Press the I/O button at any time to exit the Setup Mode and turn the ana-
lyzer OFF. Note that the last displayed parameter is automatically saved
in memory.